B&T Wilmington Concrete and MasonryB&T Wilmington Concrete and Masonry

Masonry Contractor in Wrightsboro, NC - Mortar and Walls Built to Shed Water

B&T Wilmington Concrete and Masonry is a masonry contractor working in Wrightsboro, NC. We repair brick, chimneys and foundations, repoint worn mortar, and build block walls, walkways and outdoor masonry for homeowners across the area.

Curved blue swimming pool bordered by pale stone coping and a patterned paver deck, with tiered stone garden walls behind it.

Get a masonry estimate in Wrightsboro

I'll check what's under the wall and where the water goes, not just the brick.

Request an estimate

Wrightsboro: rural lots and a growing edge

Wrightsboro still feels like a rural community when we pull up to jobs here, with houses on bigger lots, older brick ranches next to newer builds, sheds and shops out back, and real room between neighbors. That's starting to change as the new Wrightsboro Business Park brings more businesses into the area, but the calls we get here mostly come from homeowners with brick that's showing its age or a project they've been putting off.

On older brick the mortar usually gives out before the brick does, and on open lots where rain sheets across the yard, the real question is where that water goes once it hits a wall or a foundation. We check the same things on jobs in Porters Neck, but here I look at the drainage first and the brick second.

Working in Wrightsboro: county permits and what I check first

Wrightsboro is unincorporated, so building permits here come from New Hanover County, which issues them for most construction projects through its online COAST portal. The county says most permit delays happen when a job's scope changes after work begins, so I'd rather settle the scope at the estimate than halfway through the job. The county's business license only covers selling beer or wine, so that's not one to ask a mason about, but you can look up any general contractor with the NC Licensing Board for General Contractors, and the questions below cover when that license is required.

We tell you which office handles your address and help you get the paperwork together before work starts, and once the permit is in, the schedule mostly turns on the weather and on what we find when old mortar or a footing gets opened up. The price moves with how far the damage runs, how hard your older brick and mortar are to match, what has to go under a new wall and whether the drainage needs fixing first, so I walk the job with you and put the estimate in writing to give you your own number. We do the same work in Northchase and across the cities around Wilmington.

Services in Wrightsboro, NC

Get a free on-site masonry estimate in Wrightsboro

Send us a few lines about your Wrightsboro project and we'll get back to you within one business day. I come out myself to look at the job, and the estimate is free with no obligation.

Location
Wilmington, NC 28403
Hours
Mon–Sun: 6 AM–11 PM
Credentials
Fully licensed and insured.

What Wrightsboro homeowners can count on

We're based in Wilmington, NC, and offer 16 masonry services across the 12 service areas with their own page here, plus plenty of cities around them. Fully licensed and insured, with free on-site estimates.

Based in
NC
Wilmington
Services
16
Service areas
12
  • Fully licensed and insured.
  • Free on-site estimates.
  • We respond within 1 business day.

Frequently asked questions

How do I get a building permit for masonry work in Wrightsboro, NC?

You apply through the county's COAST portal, and county guidance says to contact COAST before any work begins. Structural work is on the county's list of projects that need a permit, so a new wall or a foundation repair is worth asking about, and Development Services helps with the portal at 910-798-7308, option 1, or coast@nhcgov.com. We help you get the paperwork together before we start.

How long is a New Hanover County building permit good for?

A county building permit expires in six months if work hasn't started, or after work has been halted for 12 months. That's why we line the permit up close to when we can actually start, so it doesn't run out while you wait.

How do I know if a contractor needs a state license in North Carolina?

A general contractor in North Carolina needs a state license once the total project cost is $40,000 or more. A limited license covers any single project valued up to $750,000, not counting the land or the costs to improve it, and you can check a contractor's license with the board before you sign.

Does New Hanover County regulate fences in Wrightsboro?

No, the county's zoning ordinance doesn't regulate fences. The county still advises keeping a fence clear of access, stormwater or utility easements and checking any HOA rules. A brick or block wall is a heavier build than a fence, so I'd still check with the county about a permit before we pour a footing.

How much does masonry work cost in Wrightsboro, NC?

It's priced job by job once I've seen it, because the size of the work, the shape your brick and mortar are in and what's underneath move the number more than anything. Your choices matter too, since repointing only the failing joints costs less than redoing a whole wall, block usually costs less than brick, and fixing drainage or adding a footing adds to the total. The written estimate gives you your own figure.

What causes brick and mortar to crack on houses in Wrightsboro?

Water is usually behind it, soaking into worn joints, washing under a footing or keeping the ground around a foundation wet and moving. The county notes that more than 20% of flood claims come from properties outside the high-risk flood zone and that homeowners' insurance typically excludes flood damage, so water around your house is worth taking seriously. If you've got a crack, call and I'll come show you what I think is causing it.

Tell us about your Wrightsboro project

Call (910) 218-9550 any day from 6 AM to 11 PM, or send the form and ask about permits too.

(910) 218-9550Request an estimate